MicrIO XH300AS Cross-Hair Generator
The XH300AS is the most versatile, easy to use, and cost effective video cross-hair generator available on the market. The XH300AS cross-hair generator is capable of superimposing a video cursor image on an existing video stream.
The incoming video is fed into the connector labeled “Video In”. The video input must be standard base band NTSC or PAL format. The resulting output video is available at the connector labeled “Video Out”. The output video is in exactly the same form as the incoming video except for the superimposed video generated by the XH300AS.
The XH300AS supports five different cursor types: single cross-hair, double cross-hair, single vertical line, single horizontal line, and circle. While adjusting the cursors the settings are displayed the bottom of the screen. When the adjustment is complete the settings are saved in non-volatile memory. The setting will be restored when power is applied.
Specifications:
- Video standards supported: NTSC, PAL.
- Power requirements: 8 to 15 Volts, 80 mA
- Input/output Impedance: 75 Ohms
- Cursor types: Cross-hair, double cross-hair, single line, and circle
- Control: Rotary encoder with press switch
- Video connectors: RCA or BNC jacks.
- Power connector: 2.1 mm DIN, center pin positive
- ROHS: Lead free
Full Specification (PDF) Rev. 1.4
Older versions:
Full Specification (PDF) Rev. 1.3
Full Specification (PDF) Rev. 1.1